|
Must be shipped by FedEx Ground.
#8826 |
Mylands High Build Friction Polish
There are three popular ways of finishing with this product to produce
stunning results. Sand the turned item using a cloth backed abrasive to at
least 400grade quality.
Apply the high build with a lint free cotton cloth, lightly, whilst the
item is turning. Achieving the desired build may require stopping
application occasionally, lightly de-nibbing, and then continuing
application.
If the turned item is to be handled regularly, then seal in the friction
polish with an additional application of a Carnauba Wax Stick. This is
applied with the lathe at high speed passing from one end of the piece to
the other, exerting minimal pressure. Buff with a clean piece of cotton
cloth. This can then be handled for years, retaining the original look.
(NOTE: The Beall buffing system is ideal for this application of applying
Carnauba Wax) |
Cellulose Sanding Sealer has been sprayed onto reproduction furniture for
years as a sealer prior to applications of Cellulose Lacquer.
It is also effective as a quick drying clear sealer prior to applications
of High Build Friction Polish and Melamine Lacquer. It can also be used in
conjunction with clear wax polish to give a quick-dry low sheen, water
resistant finish. Apply Cellulose Sanding Sealer whilst the lathe is
stationary with a rag or brush. |
Mylands Cellulose Sanding Sealer
Must be shipped by FedEx Ground.
#8824 |
